Kamco Clearflow Powerflushers Now Available!

Kamco CF40 Clearflow Evolution Powerflushers Now Available!

Part no. KAMCO-CF40

Kamco CF40 Evolution Power Flushing Pump Kit

Kamco are proud to announce the launch of the all new CF40 Evolution, which replaces their well proven CF30 Classic model.

The Evolution has a larger high efficiency impeller, coupled to a more powerful motor, and a low-loss flow reversing device, giving a flow rate increase of more than 30%. The key to effective power flushing is a high flow rate and, for any given heating system, the Evolution will remove more debris.

Combined isolating and dump valves mean that a twist of one handle switches the CF40 Evolution into dumping mode. By this means, all parts of the heating system can be scoured with high velocity turbulent water, improving the efficiency of power flushing and reducing the job time.

The large, stylish 39 litre tank minimises overflow risks, and is fitted with 75mm wheels so that the Evolution can be easily moved even when full.

It is supplied complete with all hoses and adaptors, and even a starter pack of chemicals, so that engineers can begin flushing heating systems straight away. Free training is offered with every pump, with further knowledgeable assistance available at the end of a telephone line.
The Evolution is constructed of corrosion resistant materials so that, in the 60% of the UK with a hard water supply, it can also be used to descale any domestic boiler, water heater or heat exchanger.

CF40 Evolution features:

Higher flow rate and larger tank capacity than CF30 Classic.
Cleans systems up to 20-25 radiators (2-3 storeys).
Integral tank handle for greater toughness. Protects from impact damage and won't corrode.
Larger diameter filler cap for easier addition of chemicals.
Three-port valves for easier dumping operation.
Improved tank shape gives greater stability, particularly when in a vehicle.
Tank has hand-holds front and back for ease of handling
75mm wheels to make it easy to move, even when full of water.
Higher temperature capability.
What's in the kit?

Hoses and fittings ready assembled

Flow and return hose: 2 x 5 metre
Dump hose: 1 x 8 metre
Water inlet hose: 1 x 8 metre
Overflow hose: 1 x 3 metre
Circulator pump adaptor hoses x 2
Starter pack of chemicals for 2+ jobs
Power Flush FX2: 2 x 2.5 litres
Systemsafe-DM corrosion inhibitor: 2 x 1 litre
Neutralising Crystals: 2 x one shot tubes
Hyper-Flush non-acidic cleaner: 1 x 1 litre
pH paper (5 metre roll)
Instruction manual
Hose carry container
Technical data:

Tank capacity: 39 litres
Motor size: 0.5 HP, IP55 (230 or 110v)
Max flow rate: 90 lt/min
Max head: 20mt
Max temp: 75ºC
Weight: 17kg
Dimensions (w x d x h): 390 x 440 x 690mm

Please note: An additional carriage charge of £50.00 + VAT will apply to all Highlands, Islands and Irish addresses due to the size and weight of this item. This fee will need to be paid separately over the phone once the order has been confirmed.